|
For details of signposting in the countryside, see Brown (1974), Agate (1983) and the Countryside Commission leaflet on waymarking public rights of way (1985). A few points should be kept in mind to make signposting effective:
WAYMARKINGOn many dune sites waymarking of both public rights of way and other paths such as nature trails is most important. Dunes can be very confusing areas to walk in, one dune looking very much like another to those not familiar with the area. Waymarking must be done consistently and given regular maintenance, so that visitors have confidence in following the marked route and are not tempted to make their own way. It can be important that people are kept to the path to avoid erosion or damage to restoration work, and to minimise disturbance to ecologically sensitive areas. The usual technique is to use posts, with the tops painted the appropriate waymarking colour of yellow for footpaths, blue for 6ridlepaths and red for byways. Alternatively, colour coding may be used in conjunction with nature trails and interpretative material. Space the posts according to the topography, normally so that there is one always in view. Well worn or surfaced paths may not need such frequent spacing. Posts should be of tanalised timber, set at least 600mm (2') in the ground, with cross pieces to prevent them being pulled out. Make them just tall enough to be easily visible. At Walney Island, Cumbria, very short posts are used, protruding only about 300mm above ground. This saves on materials, and is sufficient on this site where the vegetation is cropped short by cattle. The posts are also less vulnerable to being used as rubbing posts by the cattle, although the posts still need to be set in dug holes and wedged in with rocks, to hold them firm. On this site it is vital that no visitors stray from the path, as an entire gull colony can be disturbed by a single intruder. Posts are set at a maximum distance of 50 metres. Frequent posts are also a good encouragement to walkers to keep going and complete the circuit, especially on sections where landmarks to aim for are few. Low signs, with black lettering on a white background are also used, large enough to be visible but not to intrude. Another situation where waymarking is very important is through dune restoration areas. This is especially important in the early stages, when fencing and planting may not be complete, and it is not immediately obvious, even to sympathetic visitors, which is the designated route. It saves much antagonism if you can avert trouble by clearly waymarking the route and informing the public. White painted posts and a temporary sign may be sufficient initially, with more permanent signs as necessary once the scheme is completed. Also remember to mark paths at their seaward end. Having walked some way along a beach, it is often difficult to re-find the place where you emerged through the dunes. Use tall posts, painted white, on the seaward edge of the foredune, or put in several in a row down toward high water mark, so the point is easily visible. If there are several exits, use different colours. All content copyright © 1986-2008 BTCV Ltd. Registered charity No. 261009 |